Revisiting a previous project - collograph

Assignment 2 was all about abstract art. This is a subject I have never really been drawn to - liking a few abstract artist such as Rothko, Barbara Hepworth, Kadinsky, Ben Nicolson and Pollack but not really understanding what it was all about and without analysing why I am attracted to some and not others.

Looking at abstract paintings and prints with a more critical eye, I found it easy to identify that colour and texture appealed to me but still found difficulty in understanding what makes a good composition in abstract terms.  I have a little experience of painting abstract art from a short workshop which looked at how emotions and colours and lines are linked in our memories. This however didn’t help with the starting point for the imagery.So, I had no idea how to start this project

I have “Art of Abstract Painting” by Rolina van Vliet on my shelves and for one image she had used an aerial photograph as a starting point . I have often used imagery fleeting seen on the TV, through car windows, in books or captured in photographs as a starting point for a doodle but have never taken the idea further to try to develop it into a piece of work.   This assignment would give the opportunity to explore this to see how far I could push it. I searched through photographic books for images that had some potential. In “The Earth from the Air – 365 new days”  I found an image of the river Lippe in a flood near Olfen, Ruhr region and felt that it had possibilities.

I chose one image to work on in more detail to test whether my ideas would transfer to an abstract image. I worked one of the little thumbnails up to A4 using coloured pencil to play around with colour. I liked the colours of the earth shown in the original photograph and decided to use the same palette of colours in all three images. I then completed a quick watercolour to give the colour in the image more depth, and took the opportunity to make more generous curves than more original drawing. I made adjustments to the image and decided that, for balance the image would require some white – reserving the paper – for more interest. I then tried making the lines more geometric and finalised a design for the print based on blocks of colour, deciding on a multi-plate lino cut.

I had great difficulty with the prints, the plates were not cut well and did not register although I felt the colour was clear and reflected the landscape that the design was based on, the image is not successful as a print or as an abstract. I didn't enjoy the process at all. After a very bad - deserved - critique from my tutor, and a period of despondency, I eventually decided to revisit the image as the failure felt like unfinished business.

I  bought a little book - "starting with Abstract Painting" by Kenneth Jameson - in a second hand bookshop which was very helpful.  The book reminded me of the keys to successful design whether  realistic or abstract: 

colour:tone:texture:line:balance:form:pattern:rhythm:harmony

I used one of the ideas from the book  - cutting a photograph into uneven pieces and using one of the pieces to lead the design. This is a similar process to using a viewfinder and focusing on isolated elements. I decided to use the same source material as in the original print, and to explore some of the ideas using the image as a starting point with the intention of incorporating chine colle and/or monoprint into the final print.

I took an element from the cut photograph and started to experiment with shape and colour - one drawing leading into another drawing.

I also used collage to produce a piece to introduce a textural element. Certain strong shapes emerged in the collage that looked to provide possibilies for the print.

The textures in the collage suggested a collograph as the dense coloured texture element I wanted in the print could be achieved with quite coarse sand. I had the drawings and collage in front of me together with the original inspiration from the photograph, but I wanted the plate to be a further development rather than trying to precisely adhere to a drawn/collaged piece, so used them as inspiration rather than copying them.

The plate as made from mount board with gesso roughly spread on varying thickness on the plate and a palette knife used to create marks inspired by the previous works. Before the gesso dried I scattered rough sand in a focused way, trying to place it in specific places and shapes where I wanted certain elements of the design to be and intentionally varying the lightness and heaviness of the spread in places.

After sealing the plate, I proof inked it using ink left over from a previous print run. This was a darkish green and I used a dobber to apply it to just the raised textured part of the design. I had pre-prepared some paper so that it was damp and ready to use but the first two runs through the press required adjustment of the roller to ensure the right amount of pressure without the danger of the very sharp sand piercing through the layer of tissue and newsprint into the blanket. 

I then thought of Barbara Hartill's collographs - http://www.brendahartill.com/Brenda_Hartill/Welcome_to_Brenda_Hartills_website.html

 

She uses quite strong colour which produces some delicate effects on the print which I like so decided to apply primary red and primary yellow to the plate in a considered way first with a dobber and then later with a brush. The results were varied and I realise that I need to really push the ink into the textured service to ensure that the intaglio is inked thoroughly. After inking various plates, I wanted to try the effect of adding chine colle before putting through the press.  I took photocopies of a couple of prints and used oil pastel to imitate the effect of chine colle

I liked this effect so added chine colle - tissue and thin hand made paper stained with acrylic inks in various colours  -to the next few plates, continuing to vary thickness of oil and mixing colour on the plate with the method of "rubs" that Barbara Hartill uses. I also tested out various glues to attach the chine colle - Nori paste, pritt stick and finally liquid PVA applied with a brush. The final results are interesting and provide a good basis for further experimentation.

The textures have potential but I will use carbonundrum rather than sand in the future to achieve a denser more even texture and so that there is less danger of the paper being damaged by the sharpness of the plates.

Some of the marks on the plate are too considered - for instance the radiating lines at the top and bottom are not pleasing.

I think using gesso to produce a lightly texture background emphasised in places with sand has worked and will repeat this next time I experiment

 The addition of chine colle has been effective - giving an almost watercolour effect especially on the lighter prints.

I prefer the prints that are the result of much lighter inking, the dense colour not being as attractive or giving the feel to the image that I wanted.

This set of prints are more successful than the linocuts but I am still uncertain as to whether they work as abstract images.

The assignment has been an uphill struggle from the first mark I made.  However, I have enjoyed this revisiting of the work and have allowed myself to experiment with technique, colour and a new style and will be revisiting it again to see how far I can push the image and where it takes me.